--- title: "Particle size estimation" subtitle: > Based on the hydrometer method by ASTM D422-63 (2007) and Bouyoucos (1927) author: "Zacharias Steinmetz" date: "`r Sys.Date()`" output: html_document: keep_md: yes fig_width: 8 vignette: > %\VignetteIndexEntry{Particle size estimation} %\VignetteEngine{knitr::rmarkdown} %\VignetteEncoding{UTF-8} --- ```{r setup, include=FALSE, echo=FALSE} knitr::opts_chunk$set( echo = TRUE, warning = FALSE, message = FALSE, comment = "# >" ) ``` ## Materials ### Equipment * Balance * Horizontal shaker * Stirring apparatus * 151H or 152H hydrometer * 1 L volumetric flask * 1 L volumetric cylinders for sedimentation * 250 mL jars with a screw cap * Squirt bottle * Thermometer * Parafilm ### Chemicals * Sodium hexametaphosphate (SHMP) * Deionized water conditioned at ambient temperature ### Specimen * Soil samples, dried, and sieved to 2 mm ## Method ### Dispersing solution Dissolve 40 g of SHMP in 1 L of deionized water. To facilitate complete dissolution, fill a 1 L volumetric flask with about 500 mL of deionized water and add the SHMP step-by-step while stirring the solution with a magnetic stirrer. The solution is stable for at least one month. ### Calibration Hydrometers are graduated to be read at the bottom of the meniscus. However, readings may need be taken at the top of the meniscus in opaque soil suspensions. Mix 125 mL of SHMP solution and 875 mL of deionized water in a 1 L cylinder. Lower the hydrometer into the cylinder. When stabilized (after about 20 s), record both the reading at the bottom (zero or composite correction factor) and at the top of the meniscus (meniscus correction factor). ### Sample pretreatment If the soil sample contains primarily clay or silt, weigh out 50 g of soil (accuracy ± 0.01 g) in a 250 mL screw bottle (in 3-fold replication). If the sample is sandy, take 100 g each. Add 125 mL SHMP solution to the soil. Agitate the mixture for 16 h (or overnight) in a horizontal shaker. Completely transfer the soil slurry into the dispersion cup of the stirring apparatus using deionized water from a squirt bottle. Add deionized water, if necessary, so that the cup is more than half full. Stir for 1 min. Transfer the slurry into a 1 L sedimentation cylinder. Fill up to the 1 L mark with deionized water. Cap the cylinder with a rubber stopper or Parafilm (ensure tightness). Agitate the slurry by manually turning the cylinder upside down and back 30 times during 1 min. ### Measurement Place the sedimentation cylinder at a bench where it can stand undisturbed for the next 4–6 h. After at least 40 s and no more than 1 min, place the hydrometer in the soil solution and take the first reading. Measure the temperature of the slurry. Repeat these steps at 2, 5, 15, 30, 60, 120, 240, and 360 min. In any case, record the exact reading time. The measurements may be reduced to an initial reading after 1 min and a second one after 240 or 360 min (Ashworth et al., 2001). Remove the hydrometer after each measurement, in order not to disturb the sedimentation process, and rinse the hydrometer with deionized water. If the ambient temperature changes, recalibrate the hydrometer. In case foam obscures the hydrometer reading, use another point on the hydrometer scale as reference and mark its position with a permanent marker on the outside of the glass cylinder. The exact readings may be recorded at the end of the measurement by reinserting the hydrometer at the previous position. ### Data recording The following table may serve as a sample template to record the data | Sample data | Time [min] | Hydrometer reading | Correction | Temperature [°C] | | :---------- | ---------: | -----------------: | ---------: | ---------------: | | S1 | 0.66 | 39 | 2 | 23 | | S1 | 2.00 | 33 | 2 | 23 | | S1 | 5.00 | 29 | 2 | 23 | | S1 | 15.00 | 23 | 2 | 23 | | S1 | 30.00 | 22 | 2 | 23 | | S1 | 60.00 | 20 | 2 | 23 | | S1 | ... | ... | ... | ... | | S2 | ... | ... | ... | ... | ### Data evaluation A complete description of how to calculate the particle size distribution from the recorded hydrometer readings is available in the respective ASTM guideline (ASTM D422-63, 2007). The algorithm has also been implemented into this package using the `texture()` function. After loading **envalysis**, the `texture()` function is applied to the `clayloam` sample data set coming with this package. ```{r texture, fig.align="center"} library(envalysis) data(clayloam) print(clayloam) tex <- texture(reading ~ blank + time + temperature, data = clayloam) print(tex) plot(tex) ``` Further soil classification and plotting may be performed using the **soiltexture** package. ```{r soiltexture_package} library(soiltexture) ``` For that, the soil texture data needs to be converted into a special `data.frame`. ```{r soiltexture_convert} germansoil <- as_tridata(tex, which = "din") ussoil <- as_tridata(tex, which = "usda") ``` Now, texture classes are determined, for example, in accordance with the German "Bodenartendiagramm" (DE.BK94.TT) or USDA (USDA.TT). ```{r soiltexture_classify} TT.points.in.classes(germansoil, class.sys = "DE.BK94.TT") TT.points.in.classes(ussoil, class.sys = "USDA.TT") ``` The analyzed soil is a clay loam (German: "Toniger Lehm", Lt2), which may be plotted as follows. ```{r soiltexture_plot, echo = -1, fig.align="center"} par(cex = 0.75, cex.lab = 0.5, cex.axis = 0.5, cex.main = 1) TT.plot(class.sys = "DE.BK94.TT", tri.data = germansoil) ``` For further details, see the **soiltexture** package vignette on [CRAN](https://cran.r-project.org/package=soiltexture). ## References Ashworth, J., Keyes, D., Kirk, R., & Lessard, R. (2001). Standard Procedure in the Hydrometer Method for Particle Size Analysis. *Communications in Soil Science and Plant Analysis* **32**, 633-642. DOI: [10.1081/CSS-100103897](https://doi.org/10.1081/CSS-100103897). ASTM D422-63 (2007). *Standard Test Method for Particle-Size Analysis of Soils*. Technical standard. ASTM International, West Conshohocken, PA. Bouyoucos, G.J. (1927). The hydrometer as a new method for the mechanical analysis of soils. Soil Science 23, 343–354. Moeys, J., Shangguan, W., Petzold, R., Minasny, B., Rosca, B., Jelinski, N., Zelazny, W., Souza, R.M.S., Safanelli, J.L., & ten Caten, A. (2018). *soiltexture: Functions for Soil Texture Plot, Classification and Transformation*. URL: [https://CRAN.R-project.org/package=soiltexture](https://CRAN.R-project.org/package=soiltexture).